Hi folks ,
Today I’m going to teach you that how to make cheap easy cracker with the things available at your home easily and you don’t have to request you parent to get you cracker to show off . So This will be so special for you and your kids and you can save alot of money by using this way of making a cracker So let’s start .
Starting this “How to make a cheap and blasting cracker easily at home”
Things you need :
- One metal wire from the tire of your bike but this is important that you’ve to buy the steel thick wire of the tire rim of 125 cc bike . As mentioned below
- You need a steel nail . That is also very cheap you can buy that nail from any steel hardware shops . It’s very cheap nearly 0.1$ . The steel nail should be in this shape as shown below
- You need a strong wooden stick . The stick can be taken from any where but the best one is bamboo stick for this . As this is shown below
- You need a plastic tape for this process . Tape should be of any good company e.g Osaka . It’s also very cheap as 0.22$ . As this is shown below
- You need a strong thread which should be thick . You can purchase it from the Planting shops as this is shown below
- At last you need a match box . Which will hurrah work for you as a cracker . No you can say that cheapest cracker. You can purchase any match box cheaply 0.02$
Now let’s start that how to make and do this process to get a ear blasting cracker to disturb you enemies or children’s or children can also disturb parents . This is really a golden chance for them
- First of all you need to get all these things and then do a little curve to the Thick steel wire as shown above in fig 1
- Then all you need to get the stick and tie the Thick steel wire on it in such a ways that the empty side of the thick wire should be facing you and you can say that the curved side of the thick wire . You can do this tie by the help of the Plastic tape as in fig 3
- After doing all this you have to tie the steel nail to the thick thread in such a way that the mouth of the steel nail should be tied by that thread Tightly as shown in figure
- So after this you’re all set then you just need to crush the burning material from the sticks of match box in the hole of the curved thick steel wire facing you after the whole procedure .
- Then you’ve to close the mouth of that thick steel wire with the beak of the steel nail and then stuck it hard on the ground or wall . Where ever you when you can easily do
Thank you guys for reading this tutorial. So after this all you’ll get a cheap and blasting cracker for having a enjoy with kids or save your money .
Share it guys if you really loved this tutorial and want to help out your friends to make and if you’ve got any problem with this guys you can freely say it in our comment
Incoming search terms:
- how to make a cracker with matches
- how to make crackers with matches